Terick Solutions
Carpet Kit Polaris Xpedition XP / ADV
Reduce noise, add style, and lower heat transfer into the cab. Our heavy duty carpet kit is pre-cut to perfectly fit your Polaris Xpedition XP UTV. Carpet panels have hook and loop attached to them for easy removal and installation. Very durable material that can be washed and dries out very quickly. Adding our 100 mil sound deadening mat and our carpet kit makes this UTV much more enjoyable to drive!
2 Seat XP Includes: 7 pieces of pre-cut carpet with hook & loops attached on backside, 5 plastic rivets for securing carpet on side panels.
5 Seat XP Includes: Similar 7 pieces from the 2 seater, but an additional 2 pcs for the back floor area.
2 Seat ADV: 7 pieces total of pre-cut carpet with hook & loops attached on backside, 5 plastic rivets for securing carpet on side panels.
5 Seat ADV Includes: 9 pieces total same as the 2 seater, but an additional 2 pcs for the back floor area, 3 pcs for the rear trunk area.
This is the installation instructions PDF
****ADD OUR 100 MIL SOUND DEADENING MAT & ACOUSTIC PANELS FOR THE BIGGEST GAIN IN NOISE REDUCTION IN YOUR CAB**** (100 Mil sound deadening is sold separately)
These machines used 6-7 sheets of sound deadening mat.
The 8 or 10 sheet pack of our 100 mil sound deadening mat is what we recommend for this machine so you have extra if you want to do more areas, like the inside of the doors and/or both sides of the back wall. We also recommend 1 pack of our Terick Acoustic panels (sold separately)
We lowered the cab noise by 10-12 decibels @35 MPH after installing the carpet, sound deadening, acoustic panels and floormats . (Acoustic panels and floor mats now available!)
FAQ
Fitment
Taking 3 simple measurements is all you need to do. Take the time to watch this video explaining how to measure for the right fit. 95% of all trail sleds 2012 and newer with stock skis will take the 8" with the 1" offset
In most cases your stock bolt will work perfect. If the ski bolt has ever been changed with something different than stock you will likely need to measure it and order a bolt kit.
On the newer Ski-Doo sleds you're going to want to replace the washer behind the nut with the supplied fender washer included in each set. This gives the EZ WheelZ axle a better metal surface to butt up against.
Most all 2012 and newer models won't need any modifications.
Yes, you can, but most likely you will have to turn your ski bolt around and mount them to the outside of your ski. See this video for an example.
Other
You can contact us through our contact page. We will be happy to assist you.